led mood light

led mood light 1.5050 12PCS LEDs 2.Power:2.5W 3.Color Range:15 colors chang 4.Accessory:Power supply, remote control

led mood light , bedroom mood lighting

  Specification of LED mood light

 

Features  

 

Thank you very much for purchasing this Led mood light. Please read this instruction carefully before you use it.

 

The Led mood lighting uses SMD 5050 12PCS LEDs to give red, green and blue light. When projected onto a surface, these colors mix to produce a wide range of tones and intensities. The in-built microprocessor has different “modes” where the color mix is varied continuously by choosing from different modes and speeds. You can produce an effect to create the mood you want.

 

The Led mood light can be positioned to any place. But it’s usually advised to place against a surface, like a wall or corner. If you need something to display, you can put the Led mood light attheback of it.

 Specification  

Light Source	5050RGB 12PCS
Power	2.5W
Input	100~240V 50/60Hz
Output	12V 0.3A
Outer Case Material	Plastic + Aluminiumalloy
Color Range	15 colors changing
Colors of Outer Case	Black, Green, Blue, White, Pink
Operating Temperature	0oCto 30 oC
Dimensions	Diam 95*H80mm
Accessories	Power supply, remote control, user manual
Certifications	CE. RoHS marked, UL/GS for power supply
Life Expectancy	Up to 40 years

Accessories

Remote Control, Adaptor, User Manual

Instructions For Use

Place the Led mood light on level surface

	Connect the main lead with supply.
	Switch the unit on with topside ON/OFF switch.
Select Color	Press “Color” button, It keeps the products change colors one by one, there are 15 different colors.
Play and Pause	Press“ Play and Pause” to freeze the color while it is changing .
Reset	Press “Reset” to go back initial mode.
Slow	Press “Slow” to keep speed more slowly.
Quick	Press “Quick” to keep speed more quickly.
Brightness	Adjust the amount of white to create a deeper or softer tone of the same color using “Brirgtness+/, Brirgtness+”.

Power

This product must only be used with the supplied mains lead. The lead should be regularly examined for any signs of damage. In the event of any such damage, do not use the product until the lead has been repaired or replaced.

Safety

-Do not open or dismantle the Led mood light unit

-Do not stare directly into the LEDs.

-Always switch off when not in use.

-Keep out of reach of small children.

-Led mood light is for domestic, INDOOR use only

Environment Protection

If you discard the appliance in due course, dispose of it in accordance with the instructions of the local authority. Remove the batteries when you discard the remote controller, put the batteries in an official collectionpoint.

led mood light