led wifi lighting controller

wifi controlled rgb led strip light 1.20meters wifi controller. 2.CT,DIM,RGB controller.

led wifi controller wifi decoder

  

1. Product constitute     1. LED-WiFi Controller,     2. RF remote control,     3. A disk.

 2. Technical Parameters     1.Working temperature.-20-60°C

     2.Power supply method.AAA*3

     3.Supply voltage.1.5V*3

     4.Standby power.0.015mW

     5.Standby current.3uA

     6.Working current.200uA

     7.Emission current.10mA

     8.Remote control distance.about 50m

     9.Standby time.6 month

3. Software technical parameters    1.Name.Dream Color    2.Runtime platform.Android version support Android system(better one can support        Samsung, HTC), IOS version support IOS system, equipment must have WiFi function.    3.Byte: Android version(622K),IOS version(581K).    4.Language: English    5.Category: communications    6.Free, green, no plug-ins

4. Controller technical parameters   1:Working voltage: DC5--24V   2:Output control: can flexible control 3 channel, 2 channel, 1 channel LED lamps.   3:Output current: 4A*3   4:Connect mode: common anode   5:External dimension: L107*W65*H30(mm)   6:net weight: 246g    7:gross weight: 330g    8:Receiving sensitivity: 802.11b DSSS(-5dBm),802.11b CCK (-10dBm),802.11g     OFDM(-15dBm)

5. Dream Color Instruction   1. Dream Color install course   1) This software have Android version and IOS version, according to your mobile phone to choose to install, below respectively introduce Android version and IOS version install and use method: Android version install as below:    Open the optical disk can see the Dream Color erection Sequence

  Click DreamColor.apk to install   

  Installation complete click, 

                                                       

1. On Off key      2. color disk      3. mode key    4. speed/brightness bar   

5. RGB mode LED control window 6. Cold white and warm white mode LED control window7. Dimmer mode LED control brightness window 8,Dream Color software setting window     

Following is control color temperature and brightness two mode page:

          

CT mode page(cold warm white mixed mode)         DIM mode page(dimmer mode)

1. IOS version install method:(not escape or escape all can suit) can enter "app store" search Dream Color.Then it can find our software(below scheme just limit after escape) or open itunes,

make our installation packageDragged into itunes, as picture click to install.Installation complete click ,open application(same with Android version). 

 2. Connect WiFi network    If you open Dream Color show like below picture: prompt to choose"OK", jump to WiFi setting interface connect WiFi LED controller. Or choose "cancel"don't jump,then setting SIMULATION is ON, it will change to do not connect controller node,diagram form as below:

  choose proceed wifi setting window

               Finished setting, if popup below window:

           Indicate connect succeed     

   Open wifi connect setting   

   Prompt connect correct wifi equipment 

3. ON/OFF Key4. Mode Key Function5. Color disk instruction6. CD mode page control function7. CT mode page control function8. DIM mode page control function9. Speed/brightness bar instruction

10. Setup mode function

6. Remote control function instruction

1,on/off key  2,pause key  3,mode+  4,mode-5,Color pulley key 6,brightness+ 7,brightness- 8,speed+ 9,speed-    

    

led wifi lighting controller